fbpx

Solido SMART E

Solido Smart E is a modern biological wastewater treatment system that blends seamlessly into your yard, requiring minimal attention.

When it comes time for maintenance, the process is simple. Sludge is removed through a dedicated pipe, ehich ensures that approximately 15% of the sludge remains in the unit for continued operation. As a result, neither you nor the maintenance technicians will need to worry about how or how much sludge to remove.

The E version is a compact solution featuring a control unit for more efficient wastewater treatment and a blower housed in a hermetically sealed capsule within the unit (compliant with the IPX 6 moisture resistance standard).

  • Doesn't stand out visually in the yard - equipped with a small 600 mm well cover.
  • Easy installation, even under the driveway.
  • Very simple maintenance and sludge removal.
  • Reliable quality - made in Germany.
  • Energy efficient - consumes only 49 kWh per person annually (approximately €5.6 at €0.114/kWh). Vacation mode can be activated during prolonged absence.
  • An audible alarm warns in case of unexpected malfunctions.
  • A version with an integrated pump instead of an air lift is available for areas where purified water needs to be elevated due to soil conditions or environmental factors - no additional pumping station required.
  • Smart series devices are CE marked, tested, and certified according to the EN 12566-3 standard at the PIA GmbH laboratory in Germany.

Technical Information

The Solido Smart E integrates the advantages of well-established, reliable Sequential Batch Reactor (SBR) technology into a single-chamber tank. The incoming wastewater in this biological treatment system is directly aerated, eliminating the need for a primary settlement tank typically found in traditional systems. This design ensures highly efficient wastewater treatment without the production of unpleasant odors.

The entire volume of the tank is utilized for the treatment process. Each 12-hour cycle includes several stages—from aeration to sedimentation and the removal of treated wastewater. This single-chamber system design reduces the tank size while maintaining the efficiency of the wastewater treatment system.

The tank is made using rotational molding covered in polyethylene, which is resistant to external impacts. It comes with a 25-year warranty.

The Solido Smart E control unit issues an audible warning in case of blower or power supply failures, excessive wastewater levels in the chamber, and logs operating times and process errors.



Container Type Resident Capacity Weight Length Width Height min.(max.) Inlet min.(max.) Outlet (from the bottom of the device) Product code (with airlift) Product code (with pump)
Solido SMART EBL models 
EBL-261 - 5100 kg240 cm136 cm191 (216) cm69 (94) cm113 cmKEBL2600KEBL2616
EBL-301 - 6145 kg242 cm142 cm201 (220) cm54 (73) cm140 cmKEBL3000KEBL3016
EBL-452 - 8185 kg242 cm170 cm229 (248) cm55 (74) cm168 cmKEBL4500KEBL4516
EBL-522 - 12180 kg240 cm201 cm254 (273) cm48 (67) cm180 cmKEBL5200NKEBL5216N
EBL-763 - 18250 kg277 cm231 cm271 (301) cm32 (62) cm202 cmKEBL7600NKEBL7616N
EBL-994 - 25360 kg340 cm231 cm271 (301) cm32 (62) cm202 cmKEBL9900KEBL9916
Solido SMART EM2 models 
EM2-351 - 8195 kg240 cm124 cm206 (220) cm61 (75) cm135 cmKEM2-3500KEM2-3516
EM2-452 - 10286 kg307 cm122 cm206 (220) cm61 (75) cm135 cmKEM2-4500KEM2-4516
EM2-603 - 12366 kg340 cm122 cm235 (249) cm62 (76) cm158 cmKEM2-6000NKEM2-6016N
 

Download the PDF brochure

More information about Solido Smart E can be found in our brochure. Download now.


Already installed


Vencavai, Zarasai District

In autumn 2016, the Solido Smart E, designed for 5 residents, was installed in a rural homestead in Zarasai. The well cover with the stand is installed slightly higher, anticipating future earth leveling works.